Recommended for Dimming with Multiple Points for...

• LED Drivers

• Mains rated LEDs

• Compact Fluorescent

• Electronic Transformers

• Wire Wound Transformers

Brochure
Right Click and "Save Target As..."

Solutions...

• MultiWay Dimming
  2, 3, 4, 5... WAY Dimming! With one unit you can Soft Start or Stop, Turn Off or On, Dim up and down from as many locations as you like.

• ALL Loads!
  Made to control ALL lighting up to 400va that requires either Leading or Trailing Edge.

• Easy Installation
  No rewiring required; simply replace the existing two way switches with this KIWI and a press mech. Clicks straight into PDL, HPM and Clipsal flush plates with supplied adaptors.

• Extended Lamp Life
  Pre-Heat and Soft Start reduces the start current and eliminates thermal shock.

• FULL means FULL
  Brighter lights and increased efficiency achieved be active power factor sensing. 240volts in and up to 237volts out, 99% efficient.

• Personalised Control
  With minimum and maximum trimmers; you can set the output range for the user.

• Thermal Safety PLUS
  Temperature compensation built in and backed by a Thermal Fuse for guaranteed safety.

• New Zealand
  Designed, Manufactured and Technically supported.

For compatibility with transformers view the Transformer Guide

Recommended for Dimming with Multiple Points for...

• ALL Electronic Transformers
  on Halogen or LED lamps.

• LED Drivers

• Mains rated LEDs

Brochure
Right Click and "Save Target As..."

Solutions...

• MultiWay Dimming
  2, 3, 4, 5... WAY Dimming! With one unit you can Soft Start or Stop, Turn Off or On, Dim up and down from as many locations as you like.

• Easy Installation
  No rewiring required; simply replace the existing two way switches with this KIWI and a press mech. Clicks straight into PDL, HPM and Clipsal flush plates with supplied adaptors.

• Made for the Job!
  With active power factor sensing and switching on the trailing edge, these dommers can dim ALL electronic transformers.

• FULL means FULL
  Brighter lights and increased efficiency achieved be active power factor sensing. 240volts in and up to 237volts out, 99% efficient.

• Extended Lamp Life
  Soft Start function = no thermal shock.

• Personalised Control
  With minimum and maximum trimmers; you can set the output range for the user.

• Thermal Safety PLUS
  Temperature compensation built in and backed by a Thermal Fuse for guaranteed safety.

• Largest Loads
  Up to 1000va can be controlled from the fluch plate.

• New Zealand
  Designed, Manufactured and Technically supported.

For compatibility with transformers view the Transformer Guide

Recommended for Dimming with Multiple Points for...

• Wire Wound Transformers.

• 250volt Incandescent Lighting.

• 250volt Down/Up Lights.

• 250volt Halogen Lighting.

• Heater Elements.

• General Purpose Applications.

Brochure
Right Click and "Save Target As..."

Solutions...

• MultiWay Dimming
  2, 3, 4, 5... WAY Dimming! With one unit you can Soft Start or Stop, Turn Off or On, Dim up and down from as many locations as you like.

• Easy Installation
  No rewiring required; simply replace the existing two way switches with this KIWI and a press mech. Clicks straight into PDL, HPM and Clipsal flush plates with supplied adaptors.

• Flush Box Mountable
  Up to 3000va controlled from the Flush Plate. Models ranging from 500va to 3000va.

• Extended Lamp Life
  Pre-Heat and Soft Start reduces the start current and eliminates thermal shock.

• FULL means FULL
  Brighter lights, greater output and increased efficiency acheived by active power factor sensing. 240volts in and up to 237volts out, 99% efficient.

• Personalised Control
  All Controllers have minimum and maximum trimmers; you can set the output range for the user.

• Toughest loads
  Rated for ALL Inductive and Resistive circuits.

• Thermal Safety PLUS
  Temperature compensation built in and backed by a Thermal Fuse for guaranteed safety.

• New Zealand
  Designed, Manufactured and Technically supported.

For compatibility with transformers view the Transformer Guide